Lishen LR2170 50PT 21700 Lithium-Ion Cell
The Lishen LR2170 50PT is a rechargeable 21700 lithium-ion cell rated at 5,000 mAh, 3.60 V nominal, and 18.0 Wh. Lishen specifies a maximum discharge current of 70 A with an 80°C cell-surface cutoff.
Technical Specifications
| Specification | Value |
|---|---|
| Model | LR2170 50PT |
| Manufacturer | Lishen Battery (Suzhou) Co., Ltd. |
| Format | 21700 cylindrical |
| Chemistry | Rechargeable lithium-ion |
| Rated capacity | 5,000 mAh |
| Minimum capacity | 4,900 mAh |
| Nominal voltage | 3.60 V at 0.2C |
| Nominal energy | 18.0 Wh |
| Maximum discharge current | 70 A with an 80°C cell-surface cutoff (Lishen Rev. 1, §3.10) |
| Rapid charge | 10 A (2C) CC/CV to 4.20 V, with 100 mA termination at 25°C (§3.6). |
| Relative discharge capacity at 50 A (10C) | ≥60% of the 10 A reference capacity (Table 1). |
| Shipment state of charge | 20–30% (§11) |
| Bare cell weight | ≤69 g (manufacturer bare-cell maximum) |
| Cell dimensions (with sleeve) | Ø21.20 ± 0.20 mm × 70.50 ± 0.20 mm |
Safety Warning
Use this cell in a properly designed protected battery pack and follow Lishen’s voltage and temperature limits. Lishen’s pack-design guidance calls for overcurrent protection to cut discharge above about 50 A per cell.
Cell Specification
| Specification | Value |
|---|---|
| Cell model | LR2170 50PT |
| Standard discharge capacity | 5,000 mAh rated and 4,900 mAh minimum at 1.0 A to 2.50 V after standard charge at 25°C. |
| Rated discharge capacity (10C) | N/A |
| Nominal voltage | 3.60 V at 0.2C |
| Standard charge | 2.5 A (0.5C) CC/CV to 4.20 V, with 100 mA termination at 25°C. |
| Rated charge | N/A |
| Charging time | N/A |
| Standard discharge | 1.0 A (0.2C) to 2.50 V |
| Max. continuous discharge current | N/A |
| Max. pulse discharge current | N/A |
| Charge cut-off voltage | 4.20 V under standard charge |
| Discharge cut-off voltage | 2.50 V |
| Cycle life (high-rate, 30A) | N/A |
| Cycle life (high-rate, 40A) | ≥60% of first-cycle capacity after 500 cycles, as specified in Lishen Rev. 1, §3.13. Test conditions are 25°C ambient, 8 A charge, 40 A discharge, and 4.20–2.50 V, with discharge paused at a cell-surface temperature of ≥80°C and resumed at ≤50°C. |
| Retention characteristics | ≥90% recovery of initial capacity on the second discharge after 28 days of storage at 25°C and a recharge (§7.6.1). |
| Initial impedance | ≤5 mΩ at 25°C, measured at 1 kHz AC. |
| Operating cell surface temperature | Charging 0 to 55°C. Discharging −30 to 80°C. |
| Storage conditions | At shipment state and ≤65% RH, −20 to 60°C for 1 month, −20 to 45°C for 3 months, or −20 to 25°C for 12 months. |
| Shipment voltage | N/A |
| Cell weight | ≤69 g (manufacturer bare-cell maximum) |
| Cell dimensions (with sleeve) | Ø21.20 ± 0.20 mm × 70.50 ± 0.20 mm |





Reviews
There are no reviews yet.