CATL 3.2V 280Ah

CATL 3.2V 280Ah

$69.60

CATL 3.2V 280Ah with 280A discharge. Added from Adrian list and formatted to match current catalog style.

12 in stock

SKU: CATL-3-2V-280AH Category: Tags: , , , , Brand:

CATL 3.2V 280Ah

CATL 3.2V 280Ah with 280A discharge. Added from Adrian list and formatted to match current catalog style.

Technical Specifications

Model CATL 3.2V 280Ah
Format prism
Nominal Capacity
Discharge Current 280A
Brand Catl

Safety Warning

Unprotected cell. Always use with a BMS. Never short-circuit or overcharge. Keep away from fire and extreme heat. Not for use in e-cigarettes or similar devices.

Cell Specification

Item Specification and comments
Cell model CB310 – 280Ah 3.2V prismatic LiFePO4 cell
Chemistry LiFePO4 (LFP) prismatic cell for energy storage systems
Typical capacity 280Ah – defined under CATL standard charge/discharge procedures
Typical energy 896Wh (3.2V × 280Ah)
Operating voltage range 2.5~3.65V (standard); absolute 2.0~3.65V depending on temperature
Impedance (1kHz) 0.17 ± 0.05mΩ
Shipping capacity 112 ± 1Ah (≈40% SOC fresh cells)
Standard charge power 0.25P at 25 ± 2°C (≈224W for a fresh 896Wh cell)
Standard charge voltage Cell max voltage 3.65V
Standard charge method 0.25P constant power to 3.65V, rest 5min, then 0.1P constant power at 3.65V
Standard discharge power 0.25P at 25 ± 2°C (≈224W)
Maximum continuous discharge power 0.5P (≈448W)
Discharge cut-off voltage 2.5V for T > 0°C; 2.0V for T ≤ 0°C
Standard charge temperature Cell temperature 25 ± 2°C
Absolute charging temperature 0~60°C (stop charge outside this range)
Absolute discharge temperature -20~60°C (stop discharge outside this range)
High/low-T capacity ≈280Ah @ 55°C, ≈155Ah @ -20°C (0.25P, specified voltage window)
Temperature rise (continuous) ≈10°C under standard discharge conditions
Temperature rise (pulse) ≈5°C at 500A for 10s at any SOC
Safety / development status Sample in development stage; process freeze and mass-production specs to be re-defined
End-of-life criteria Stop use when internal resistance ≈200% initial or capacity ≈60% of typical (≈168Ah @ 25°C)
Recommended preload force 500–5000N on fresh cell for pack design; swelling force at 60% SOH ≈40000N

Download Manufacturer data sheet

Battery Safety

Battery Safety & Product Disclaimer

Read before purchasing or using any rechargeable lithium-ion battery.

Rechargeable lithium-ion batteries are high-energy devices that require proper handling and technical knowledge. Improper use can lead to fire, explosion, thermal runaway, serious injury, property damage, or death.

By purchasing products from CH-AmpX, you acknowledge these risks and agree to use all battery products responsibly and in accordance with manufacturer specifications.

Read the Complete Battery Safety Guide

Is This Product Right for You?

CH-AmpX battery cells are intended for:

  • Professional battery pack builders
  • Engineers and product developers
  • Industrial applications
  • Qualified hobbyists familiar with lithium-ion battery technology

These cells are designed to be integrated into battery packs protected by an appropriate Battery Management System (BMS) or Protection Circuit Board (PCB).

They are not intended for standalone consumer use, vaping devices, e-cigarettes, or any application lacking proper battery protection.

Before Every Use

Always inspect every battery before charging, installing, or transporting it.

Do not use any battery that shows signs of:

  • Damaged or torn PVC wrapping
  • Missing insulator ring
  • Dents or crushed casing
  • Swelling or bulging
  • Leakage
  • Corrosion
  • Burn marks or overheating

Using a damaged cell significantly increases the risk of battery failure.

Safe Charging Practices

Battery safety begins with proper charging.

Always:

  • Use a charger designed for lithium-ion batteries.
  • Confirm the charger matches the battery's voltage specifications.
  • Charge on a non-flammable surface.
  • Monitor batteries while charging.

Never:

  • Overcharge or over-discharge a battery.
  • Leave batteries charging unattended.
  • Charge damaged cells.
  • Use incompatible charging equipment.

Safe Storage & Transportation

Improper storage is one of the leading causes of accidental battery incidents.

Never carry loose batteries in:

  • Pockets
  • Backpacks
  • Purses
  • Toolboxes
  • Bags containing metal objects

Contact with keys, coins, tools, or other conductive materials can create a short circuit capable of causing severe burns, fire, or explosion.

Always transport batteries inside protective, non-conductive battery cases.

Store batteries in a cool, dry environment away from excessive heat, moisture, and direct sunlight.

Understanding Thermal Runaway

Thermal runaway is a rapid chain reaction that causes a battery to generate excessive heat, potentially resulting in venting, fire, or explosion.

It may be caused by:

  • Overcharging
  • Short circuits
  • Physical damage
  • Excessive temperatures
  • Internal battery failure

Reducing these risks begins with proper charging, careful handling, and correct battery storage.

Never Do the Following

To reduce the risk of injury or property damage, never:

  • Short circuit a battery.
  • Crush, puncture, or modify the cell.
  • Expose batteries to fire, water, or excessive heat.
  • Charge or discharge outside the manufacturer's specifications.
  • Dispose of lithium-ion batteries in household trash.

Recycle batteries only through approved recycling facilities.

If a Battery Fails

Immediately stop using any battery that becomes unusually hot, swells, leaks, hisses, or emits smoke.

If it can be done safely:

  • Move the battery to a non-flammable surface such as concrete or sand.
  • Keep it away from combustible materials.
  • Allow the battery to cool from a safe distance.

For lithium-ion battery fires, an ABC dry chemical extinguisher may be used. Large amounts of water may also be effective for cooling lithium-ion cells and helping prevent fire spread. Continue monitoring the battery after the incident, as damaged cells may reignite.

If the fire cannot be safely controlled, evacuate the area immediately and contact emergency services.

CH-AmpX Product Disclaimer

CH-AmpX supplies lithium-ion batteries and battery components intended for knowledgeable users and professional battery pack builders.

Customers are responsible for ensuring that all batteries are used, charged, stored, transported, and installed according to manufacturer specifications, industry best practices, and applicable regulations.

CH-AmpX shall not be held liable for any injury, property damage, equipment failure, financial loss, or other damages resulting from:

  • Improper handling or misuse
  • Incorrect charging practices
  • Unauthorized modification
  • Improper storage or transportation
  • Failure to follow recommended safety procedures
  • Use outside manufacturer specifications

By purchasing from CH-AmpX, you acknowledge the inherent risks associated with lithium-ion batteries and accept full responsibility for their safe handling and use.

View Complete Safety Guide
Weight 11.778 lbs
Dimensions 8.157 × 6.846 × 8.157 in

Reviews

There are no reviews yet.

Be the first to review “CATL 3.2V 280Ah”

Your email address will not be published. Required fields are marked *

Related products