LINKDATA INR21700S-70P 7000mAh 21700 Cell | 40A Continuous / 60A with 80°C Cutoff | 170A Pulse (10s)

$19.78

The LINKDATA INR21700S-70P is a rechargeable 21700 lithium-ion cell with 7,000 mAh typical capacity, 6,860 mAh rated capacity, and 3.6 V nominal voltage. Linkdata lists 40 A continuous discharge, 60 A continuous with an 80°C cell-temperature cutoff, and 170 A pulse discharge for 10 seconds.

In stock

SKU: LINKDATA-INR21700S-70P Category: Tags: , , , Brand:

LINKDATA INR21700S-70P 21700 Lithium-Ion Cell

The LINKDATA INR21700S-70P is a cylindrical rechargeable cell with a steel can. Linkdata specifies 7,000 mAh typical capacity and 6,860 mAh rated capacity.

Technical Specifications

Specification Value
Model INR21700S-70P
Manufacturer Linkdata New Energy Co., Ltd.
Format 21700 cylindrical
Chemistry Rechargeable lithium-ion
Typical capacity 7,000 mAh
Rated capacity 6,860 mAh
Nominal voltage 3.6 V
Nominal energy 25.2 Wh
Maximum continuous discharge current 40 A (manufacturer rating without a temperature cutoff) or 60 A with an 80°C cell-temperature cutoff.
Maximum continuous charge current 14 A (2C)
Cell weight 70.8 ± 1.5 g
Cell dimensions Ø21.35 ± 0.15 mm × 70.8 ± 0.2 mm

Safety Warning

Use this cell only in a properly designed battery pack with appropriate protection. Follow the manufacturer’s charging and discharging limits.

Cell Specification

Specification Value
Cell model INR21700S-70P
Standard discharge capacity 7,000 mAh typical, 6,860 mAh rated
Rated discharge capacity (10C) N/A
Nominal voltage 3.6 V
Standard charge 7 A (1C). The rate-test chart uses CC/CV at 4.2 V with 0.02C termination.
Max. Continuous  charge 14A (2C)
Charging time N/A
Standard discharge 1.4 A (0.2C)
Max. continuous discharge current 40 A (manufacturer rating without a temperature cutoff) or 60 A with an 80°C cell-temperature cutoff.
Max. pulse discharge current 170 A for 10 s or 200 A for 2 s
Charge cut-off voltage 4.2 V under standard conditions
Discharge cut-off voltage 2.5 V under standard conditions
Cycle life (high-rate, 30A) 100 cycles at ≥80% state of health at 25°C (7 A charge and 30 A discharge)
Cycle life +7A/-7A RT
400 cyc≥60%SOH
Retention characteristics N/A
Initial impedance Typical AC ≤5.5 mΩ at 30% SOC. Typical DC ≤18 mΩ at 50% SOC (1C, 10 s).
Operating cell surface temperature Charging −10°C to 60°C. Discharging −30°C to 80°C.
Storage conditions N/A
Shipment voltage N/A
Cell weight 70.8 ± 1.5 g
Cell dimensions (with sleeve) N/A

Download Manufacturer Data Sheet

Download Manufacturer Data Sheet (PDF)

Battery Safety

Battery Safety & Product Disclaimer

Read before purchasing or using any rechargeable lithium-ion battery.

Rechargeable lithium-ion batteries are high-energy devices that require proper handling and technical knowledge. Improper use can lead to fire, explosion, thermal runaway, serious injury, property damage, or death.

By purchasing products from CH-AmpX, you acknowledge these risks and agree to use all battery products responsibly and in accordance with manufacturer specifications.

Read the Complete Battery Safety Guide

Is This Product Right for You?

CH-AmpX battery cells are intended for:

  • Professional battery pack builders
  • Engineers and product developers
  • Industrial applications
  • Qualified hobbyists familiar with lithium-ion battery technology

These cells are designed to be integrated into battery packs protected by an appropriate Battery Management System (BMS) or Protection Circuit Board (PCB).

They are not intended for standalone consumer use, vaping devices, e-cigarettes, or any application lacking proper battery protection.

Before Every Use

Always inspect every battery before charging, installing, or transporting it.

Do not use any battery that shows signs of:

  • Damaged or torn PVC wrapping
  • Missing insulator ring
  • Dents or crushed casing
  • Swelling or bulging
  • Leakage
  • Corrosion
  • Burn marks or overheating

Using a damaged cell significantly increases the risk of battery failure.

Safe Charging Practices

Battery safety begins with proper charging.

Always:

  • Use a charger designed for lithium-ion batteries.
  • Confirm the charger matches the battery's voltage specifications.
  • Charge on a non-flammable surface.
  • Monitor batteries while charging.

Never:

  • Overcharge or over-discharge a battery.
  • Leave batteries charging unattended.
  • Charge damaged cells.
  • Use incompatible charging equipment.

Safe Storage & Transportation

Improper storage is one of the leading causes of accidental battery incidents.

Never carry loose batteries in:

  • Pockets
  • Backpacks
  • Purses
  • Toolboxes
  • Bags containing metal objects

Contact with keys, coins, tools, or other conductive materials can create a short circuit capable of causing severe burns, fire, or explosion.

Always transport batteries inside protective, non-conductive battery cases.

Store batteries in a cool, dry environment away from excessive heat, moisture, and direct sunlight.

Understanding Thermal Runaway

Thermal runaway is a rapid chain reaction that causes a battery to generate excessive heat, potentially resulting in venting, fire, or explosion.

It may be caused by:

  • Overcharging
  • Short circuits
  • Physical damage
  • Excessive temperatures
  • Internal battery failure

Reducing these risks begins with proper charging, careful handling, and correct battery storage.


Never Do the Following

To reduce the risk of injury or property damage, never:

  • Short circuit a battery.
  • Crush, puncture, or modify the cell.
  • Expose batteries to fire, water, or excessive heat.
  • Charge or discharge outside the manufacturer's specifications.
  • Dispose of lithium-ion batteries in household trash.

Recycle batteries only through approved recycling facilities.


If a Battery Fails

Immediately stop using any battery that becomes unusually hot, swells, leaks, hisses, or emits smoke.

If it can be done safely:

  • Move the battery to a non-flammable surface such as concrete or sand.
  • Keep it away from combustible materials.
  • Allow the battery to cool from a safe distance.

For lithium-ion battery fires, an ABC dry chemical extinguisher may be used. Large amounts of water may also be effective for cooling lithium-ion cells and helping prevent fire spread. Continue monitoring the battery after the incident, as damaged cells may reignite.

If the fire cannot be safely controlled, evacuate the area immediately and contact emergency services.

CH-AmpX Product Disclaimer

CH-AmpX supplies lithium-ion batteries and battery components intended for knowledgeable users and professional battery pack builders.

Customers are responsible for ensuring that all batteries are used, charged, stored, transported, and installed according to manufacturer specifications, industry best practices, and applicable regulations.

CH-AmpX shall not be held liable for any injury, property damage, equipment failure, financial loss, or other damages resulting from:

  • Improper handling or misuse
  • Incorrect charging practices
  • Unauthorized modification
  • Improper storage or transportation
  • Failure to follow recommended safety procedures
  • Use outside manufacturer specifications

By purchasing from CH-AmpX, you acknowledge the inherent risks associated with lithium-ion batteries and accept full responsibility for their safe handling and use.

View Complete Safety Guide
Weight 0.1892 lbs
Dimensions 2.835 × 0.866 × 0.866 in

Reviews

There are no reviews yet.

Be the first to review “LINKDATA INR21700S-70P 7000mAh 21700 Cell | 40A Continuous / 60A with 80°C Cutoff | 170A Pulse (10s)”

Your email address will not be published. Required fields are marked *